RM-SX15 Rackmount 15.4 inch SXGA LCD Monitor
Industrial LCD Monitor with VESA Flat Panel Mounting Physical Mounting Interface Standard
- Features and Benefits
- 15.4" screen size @ SXGA resolution
- SXGA resolution equals to 1280 x 1024 number of pixels. Compared to an XGA display, there is 66% more display area. The increased screen resolution has a direct impact on productivity, because now you can show more of your data, images, spreadsheet with less scrolling.
- Wide color gamut LCD panel
- Color gamut is the range of color a display can reproduce and is commonly expressed as a percentage of NTSC. Although NTSC stands for National Television System Committee, which developed television standards for North America, in this instance, 100% of NTSC refers to the full range of color that can theoretically be displayed.
Color gamut of CRT monitors are typically about 70% of NTSC. A display that can combine both high luminance and a high-percentage color gamut should provide the best image- reproduction capability. - Versatile mounting options
- RM-SX15 can be rack mounted in standard
19" equipment racks. The front bezel is made of 0.25" thick,
heavy duty aluminum with mounting holes (see outline drawing for dimensions).
It can be wall-, bench top-, swing arm-mounted via rear panel's VESA
mounting
holes. Both 75mm and 100mm mount patterns are supported.
- Direct backlight LCD panel
- Backlight systems for LCDs can be divided roughly into two types:
1. directly-under (reflective) systems, and
2. sidelight/edge light (light-guiding plate) types.
In the directly-under system a fluorescent lamp is positioned in a cage consisting of a reflective plate and diffusive plate, so that light from the lamp is reflected and scattered. Fluorescent lamp shapes in use include straight tubes, U-shaped and W-shaped lamps. A light curtain and a diffuser are mounted over the lamps to reduce unevenness in brightness. Compared with other methods, the directly under system offers higher brightness.
Sidelight/edge light uses a straight CCFL lamp along one side of the LCD, or two lamps on opposite sides of the LCD, or L-shaped lamps along the opposite corners of the LCD. Edge light units use a reflector and light-guiding plate to direct light from the fluorescent lamp to the screen to evenly disperse light over the LCD. LCD panels using this backlighting technique are usually thinner and have good average brightness. In addition, greater ease in changing the lamp, and lower power consumption are also important features.
Rugged industrial flat panel LCD monitor for rack mount, swivel-arm mount, VESA mount, panel mount. 15.4 inch NEC LCD panel.
RM-SX15 industrial flat panel LCD monitors is constructed of heavy duty metal for ruggedness. It is suitable for rackmount, VESA mount, swivel arm mount, panel mount. Ruggedized for industrial environment, flat panel LCD, rackmount LCD, industrial LCD, industrial monitor, rackmount monitor, it comes with a 15.4 inch LCD, high contrast ratio, wide viewing angles, wide color gamut and SXGA 1280 x 1024 optimum resolution. It includes a built-in A/D (analog/digital) conversion board for interfacing to standard analog video cards. Front panel OSD control buttons let you adjust the display for optimum viewing.
